It is heavy..n made for bench shooting
Test ammo with the 82 grain boolits i made from 22 magnum cases..
2000 fps..
N thos are the dies both sizing n now a seating die..
The sizing is from an old school 22 hornet size die..that was wore out..the seater die is from a blank I bought..it was stoopped cheap.....n saved me a boat load of machine work...
Both work pretty ok...:0)
The size die has no expander.. n the cases last longer that way..as they are not worked all that much..Just gets squoze..down to proper diameter..
The hornet brass is rather thin..n less working is better imo..
The seating die keeps everything strait..in the neck while seating the boolit.. ;0)
Lookin forward to nice weather n see what all this stuff dose.. :0)
Not gun parts...but drill parts...
Better n waitin a month fer it...
:0/
Just makin ah paper weight.... :0)
Picked up an old 25 stevens barrel..wanna try to make a 25 hornet at some point..in the near future..
Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)
Copyright 2026 Banjo Hangout. All Rights Reserved.
