Saw is up n runnin... :0)

I do have real good buddy support... :0]

On a side note...the black Ford truck.. $883.00..new steering box installed...

But not drives correct...
Wandered a bit before..n I do not like that ..at all...

quote:

---

Originally posted by STUD figmo Al

On a side note...the black Ford truck.. $883.00..new steering box installed...

But not drives correct...
Wandered a bit before..n I do not like that ..at all...

---

Oops...

But ..NOW...drives correct...

^^ reminds me of  back when I was trying to farm... somewhat unusual I expect.   Things were getting a bit loose/wobbly on the farm run-about, an '85 [or maybe '86?] GMC 1/2 T.   I decided to replace several front suspension parts [tie rod ends, linkages, bushings, etc.]  and decided to I see if I could get by without a front-end alignment, so I carefully measured stuff [like how far nuts were threaded onto shafts, distances between different parts, etc.].   Long story short.... I figured it must have been a reward for my good clean living* .... truck handled A-1, no abnormal tire wear etc., etc.

* or maybe simply more luck than brains??  

quote:

---

Originally posted by Owen

^^ reminds me of  back when I was trying to farm... somewhat unusual I expect.   Things were getting a bit loose/wobbly on the farm run-about, an '85 [or maybe '86?] GMC 1/2 T.   I decided to replace several front suspension parts [tie rod ends, linkages, bushings, etc.]  and decided to I see if I could get by without a front-end alignment, so I carefully measured stuff [like how far nuts were threaded onto shafts, distances between different parts, etc.].   Long story short.... I figured it must have been a reward for my good clean living* .... truck handled A-1, no abnormal tire wear etc., etc.

* or maybe simply more luck than brains??  

---

That is one of the things we dew here...

Count the exposed threads....

The parts we have used are all real close in tollarance..

Up graded.... :0)

The bending tool i made worked
But to slow compaired to this rig..
Found out behind a red barn..................

2" slabs cut...
I'm pooped..

First boards I done in a looong time... :0/

:0)