Banjo Hangout Logo
Banjo Hangout Logo

Premier Sponsors


Page:  First Page   Previous Page   ...  30   31   32  33

Nov 8, 2026 - 4:07:27 PM

45987 posts since 3/5/2008

Well..I am at a 50/50 adveridge..
12 trys and 6 good cases..the other 6 split..
Upon fire forming...
I am not suprised..as ..it is a rather big change in the case shape..

I may try a differnt method if I can find empty 30-30 brass
Or 32-40 brass mebee 38-55..brass..where it gets squashed down to size..rather than blowing out..

I think 219 zipper brass will split too..
All in all..I do have a few to play with as of now..


 

Nov 11, 2026 - 5:06:15 AM

45987 posts since 3/5/2008

Aside of making brass for this setup..
Another thing I had to work out or around..is the fact that the cartridge is long ..n more importantly..Fat..

The issue is the curve of the loading ramp..
It needed to be modified in order to work well..or at all..
When fire forming it is not a problum putting the round in..but after the case has been formed...it is too fat to make the ark of the factory ramp..

Me guess is that is the reason the barrel hit the market in the first place..
I am not afraid to modify ass necessary.. ;0)

Had to do a bit of it for the 44-40 wcf too...

I did get it to work.. but have to do a few more steps in the reloading of the cartridge prossess...
As I do not want to buy or make dies for this project..
A better candidate..would to do this in 25-35 winchester..
N..I may just do..that..

Nov 11, 2026 - 5:09:09 AM

45987 posts since 3/5/2008

Still..all in all a fun project...

Nov 11, 2026 - 2:12:56 PM

45987 posts since 3/5/2008

Ok....
Change of plans...
Was considering a 25-35 winchester...

But it dawned on me...that i have a .256 winchester magnum reamer...
Cases all...made.. allready...n an extractor all made for it allready...
N..the bonus..if i buggered it..well then the 25-35 reamer would fix ...that... . ;0)
So...
That's what I did just proof fired it...still got stuff to do on it for extraction.. part.

But the barrel n chamber came out real good..
N it is only a 20 inch barrel.. which will be very efficient for this cartridge... :0)




Edited by - STUD figmo Al on 11/11/2026 14:15:15

Nov 12, 2026 - 2:15:45 PM

45987 posts since 3/5/2008

Todays folley...
Grossme shopping with Liz...

Keeps goin up the cost that is..
But we are stocked fer a while...

Cut the breech for n installed the extractor...works ok..
Test fired again..
Should be a good little shooter.. :0)
Most likely put a scope on it..
Not a 100% sure yet..




Nov 13, 2026 - 3:00:44 PM

45987 posts since 3/5/2008

Started doing a scope mount for this rifle...

Fwiw..this is one of thos deals where what could go wrong...did...
I do not know how I did it..but I drilled a hole out of placement..
N the contour of the barrel is being a pain..
Have tried 2 differnt mounts.. n systums....
Just one of thos days where things did not go..me way... :0/

All is not lost.. n mebee it will go better tomorrow... :0)

Nov 14, 2026 - 11:59:47 AM

45987 posts since 3/5/2008

Well.it is on n it is solid..
Not the best job I have done.
Shouldah.. planned it out ..better..

Cheated ..n made an epoxy scope rail block...

Looks to be strait n level..
But we will see at the range..


 

Edited by - STUD figmo Al on 11/14/2026 12:01:59

Nov 15, 2026 - 1:32:54 PM

45987 posts since 3/5/2008

Well...every once in a while ya get one of these projects that fight you every way...
Yep...that there is a broken bottoming tap...
Just no saving it..I tried...
Wicked pissah.... :0/


 

Edited by - STUD figmo Al on 11/15/2026 13:33:46

Nov 15, 2026 - 1:38:35 PM

45987 posts since 3/5/2008

On the flip side it did zero..
N.the buggered fore end job salvaged..ok..
It will work...
Just not as pretty or nice as I wanted it to come out...

But if it shoots good ..I'll take it..

Fwiw..the gas checked cast boolits i loaded to zero it..are moving 2200 fps
With powder coated boolits..




 

Nov 16, 2026 - 11:25:42 AM

45987 posts since 3/5/2008

5 shot group...
First 3 bullets in one hole..
The last 2..I was moer interested in getting the chronograph to register..it was being a bugger today..

So despite me best efforts at screwing up.. the little rifle dose shoot good..

:0)


 

Nov 16, 2026 - 11:27:51 AM

45987 posts since 3/5/2008

Oh these were 60 grain speer bullets in that group..at apx 2200+fps..
Did finally get one reading...

Nov 19, 2026 - 4:24:36 PM

45987 posts since 3/5/2008

Cast boolit loads..
14 gr 4198 powder lyman 90 gr 257312 boolit..1930 fps.. 256 win mag

Shoots pretty ok..bout an inch groups at 50 yards

Nov 19, 2026 - 4:25:23 PM

45987 posts since 3/5/2008

Oops..


 

Page:  First Page   Previous Page   ...  30   31   32  33

Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)

Copyright 2026 Banjo Hangout. All Rights Reserved.





1.353516