Posted By: frianm (+74) | Rate Member
$55 USD
This pot came from England and someone had cut the hole for a dowel stick in the wrong place, thus making it impossible to mount a neck. I have filled the offending oblong hole with a piece of hardwood. I have found that using co-ordinator rods is a much easier way to mount a neck and so filled the hole. I then decided to abandon the project! The pot is slightly off round by about 1/16 inch. The diameter is 10 9/16 heel to tp and 10 ? side to side +/-. The tension hoop is original. The supplied head is an intact Remo with wear, but no tear of holes. The pot is 5/15 inch thick, including the cladding. It has holes for 24 shoes. The tension hoop shows signs of lots of use, is slightly distorted but is very usable - the outside of the pot shows lots of use and age. The overall diameter, with the hoop on the pot is 11 inches.
Please message me with questions. Shipping is CONUS Ground. No returns
Location:
United States, Chester, VT, 05143
Shipping:
35
Payment Methods:
Check/Money Order, Cash (in person), Paypal
Payment Option Notes:
Please add 3.5% if using PayPal as I will not do "friends and family." This is for protection for both buyer and seller.
Return Policy:
Returns not accepted.
Condition of Item(s):
Used - Fair Condition
Category:
Ad Status:
Active
Listing No:
115032
Page Views:
214
This ad will automatically expire 7/5/2026 10:54:44 AM unless updated before that date. To keep the system current, ads expire if not updated for more than 60 days.
Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)
Copyright 2026 Banjo Hangout. All Rights Reserved.
