Banjo Hangout Logo
Banjo Hangout Logo

Premier Sponsors


Nov 19, 2026 - 12:49:42 PM
2 posts since 11/19/2026

Hi all - first time on your site! I picked up a banjolele today at an auction (for transparency, I am looking at selling it to make a living!). I know nothing about them, but I am a big George Formby fan which is what attracted me to it in the first place! Any information you good people could give would be very much appreciated so I can include as much information in its listing when I come to sell it - I'll give as much information as I can and upload some photos as well. My apologies if this is the wrong forum room etc or this is too cheeky of me to ask!

Weight - approx 1.8kg. Size - diameter 260mm, arm length approximately 350mm. The pegs turn OK, but I'm reluctant to go too far as I've no experience of tuning these things. The wooden back is a bit intriguing; there is a central threaded screw that unscrews pretty easily - inside looks clean etc. The thing is the back screws back on ok and goes tight but the back panel remains loose - is this normal or should everything be as tight as possible? One thing I have noticed it the hole in which the screw goes in the back doesn't go all the way through the piece of wood - I feel if it did it would tighten completely but I don't want to damage anything! This piece of wood is the one inside and seems to be a strut of some sorts. Am I also right in thinking that there should be something to hold the strings off the front of it - something like a bridge for example? There are no discernible markings anywhere that i can see, other than George's badge. I have seen elsewhere that on the back of the headstock there should be some letters and/or numbers - again I've looks but I'm not seeing anything.

Nov 19, 2026 - 12:51:43 PM

2 posts since 11/19/2026

Here's some photos....








Nov 19, 2026 - 1:21:34 PM

47 posts since 10/31/2025

Yes it's missing the bridge. Looks like you'd need a 4-string tenor bridge. That's the extent of my ability to help here.

Nov 19, 2026 - 7:38:15 PM

16867 posts since 10/30/2008

Well you're lucky that the calfskin head appears to NOT be burst, split or torn. They are so costly it's hard to make a profit on eventual sale.

A 4 string banjo bridge will cost around $10 (US). Then you can tune the thing up and show it around for sale.

In the US, these instruments do not bring much money unless they carry a popular brand name (for instance Gibson).

Good luck.

Nov 19, 2026 - 9:44:31 PM

3443 posts since 2/4/2013

I don't think it is usual for the screw in the back to go into the wooden dowel/perch pole. My vintage banjos with a screw in the centre have a piece of metal attached to the dowel for the screw to screw into like this picture.


Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)

Copyright 2026 Banjo Hangout. All Rights Reserved.





Hangout Network Help

View All Topics  |  View Categories

7.617188E-02