Banjo Hangout Logo
Banjo Hangout Logo

Premier Sponsors


Nov 17, 2026 - 2:02:16 PM
likes this

GStump

USA

797 posts since 9/12/2006

I wonder if anyone else has run into this lately - have been checking on where some things as mundane as banjo tuners may be obtained. I have checked with Stewmac, and Sullivan banjos. It would appear that the Waverly V2 tuning peg, in the gold plated engraved version, will no longer be manufactured. I actually had someone at Stewmac TELL ME THAT. They are in fact the manufacturer of these pegs so I presume this info is correct! I have also noted that Sullivan banjos, (and so as NOT to appear that I'm picking on Sullivan banjos!) and some other websites, so many of the banjo parts are OUT of stock, or the business is no longer going to keep those parts..... in addition, GOLD plated banjo parts, same story.... NO ONE appears to be keeping those parts in stock now..... don't even get me started on top tension banjo parts..... Everybody weigh in with your thoughts!

Nov 17, 2026 - 2:35:44 PM
like this

3948 posts since 4/7/2010

GStump

I have plenty of Gotoh banjo tuners in stock with a variety of finish options including nickel, aged nickel, raw brass, gold, and black chrome.

None the less, I have seen the same as you, that banjo parts are harder to find and there may be a time when no one has the drive to make the parts we really need.

Bob Smakula
smakulafrettedinstruments.com

Edited by - Bob Smakula on 11/17/2026 14:36:29

Nov 17, 2026 - 3:29:16 PM

banjonz

New Zealand

13024 posts since 6/29/2003

There are tuners on Aliexpress, Temu and Ebay which are low end of the range. These ones come on the lower to middling end of Asian made instruments. These are a bit of a lottery in terms of quality and operation. The Guyker brand are imitation of Gotoh tuners and are incredibly well made and very smooth. These markets also have Tailpieces and arm rests.

Nov 17, 2026 - 4:15:41 PM
like this

1282 posts since 2/17/2005

It has been sad (from a banjo player's perspective) to see StewMac in particular turn away from its roots as a banjo parts manufacturer. I understand the market realities of that gradual dissolution but boy its a bummer.
I look forward with dismay to the day that Mr. Smakula exits the scene, particularly because of his Remo connection and the dizzying range of sizes/materials he continues to offer. And of course Bob is an awesome guy with a great sense of humor!
The general shortage of gold plated parts and top tension parts speaks to the dynamic Bob is prognosticating about. No one gets rich making banjo parts but even small markets typically find manufacturers to serve them...we may be in a major contraction where the next generation of parts makers has yet to shake out.
The raw cost of materials like brass is also not friendly to people wanting to enter this space...

Edited by - Pigeontown Banjo Co on 11/17/2026 16:20:55

Nov 17, 2026 - 4:22:09 PM

30186 posts since 6/25/2005

Unless they see a reasonable profit forthcoming, makers will opt out of low-volume, labor-intensive manufacturing.

Nov 17, 2026 - 4:53:47 PM

jonc

USA

533 posts since 10/23/2014

lots of people are picking on Sullivan banjos

Nov 17, 2026 - 5:03:02 PM
like this

1410 posts since 10/31/2007
Online Now

Another vote for Bob Smakula. His pricing is great, the Gotohs are excellent.
There is also Rickard's 10:1 tuners which are excellent but a fair bit more.
I use both and need look no further.
Unfortunately, anyone who is in the business of making parts for banjos ain't getting rich--simple supply and demand.

Nov 17, 2026 - 6:42:20 PM

GStump

USA

797 posts since 9/12/2006

All you who replied - you are correct of course. And yes, I know other manufacturers are making banjo parts and are trying to compete. There most likely will never be many folks who can say, "I got rich making and selling banjo parts." Yes, we understand that. But to see SO MANY of the suppliers we all know going away from it as time goes by, just seems to be somehow "weird"..... It is definitely going to be interesting to see how this all shakes out over the next several years, and who will survive and who will not.... and whether any real competition comes forth, or "newbies" to the game if you will!

Nov 17, 2026 - 8:14:54 PM
likes this

17866 posts since 6/2/2008
Online Now

On the issue of tuners, it appears to me that Schaller no longer makes them. Regular or D-tuner.

I believe Saga still sells Golden Gate tuners, but what they are is probably only known within the trade.

Gold Tone sells parts. Some in gold. I suspect their hooks and nuts are not US threaded but I don't know that for a fact.

Nov 17, 2026 - 8:27:02 PM
likes this

Helix

USA

17801 posts since 8/30/2006

Companies were started by enterprising people.  Those people have moved into retirement or collector's markets with old days' names. 
No collectives of equal share pay have arisen for the niche market.  Owners can be terribly cynical. Smakula is not.

First Quality Music had a good number of  full-time employees with full benefits and good pay.  The catalog was immense.

internet changes everything.

i buy my brass locally and they cut it to length for me.

hex bar in brass is available everywhere. It's too time consuming, but possible to have hex shoes and conches and nuts, then the hooks,  then PLATING which requires acid bath to pollute and provide pretty stuff.

nobody is talking about printed banjo parts yet?

venture capital goes to make weary workers in foreign countries. Communism is soul -killing.

we make the best music because of liberty and freedom, but all people make great music when the kings make themselves rich.  
A co- op with equal share is not commie, nor socialist, it's Harry Truman with young people.   
Gold?  Plating on clean stainless still requires etching and dipping.  Look at Greg Rich's new work for engraving.

Disabled Veterans and adults can have legal commensurate wages and the most cost effective use of taxpayer support if needed at all.  
banjos of the quality from a century ago can be had again, but supply of parts would be the next folding of the cloth.

Thanks for the forum.  (    ):)===='== : : }

Nov 17, 2026 - 8:50:14 PM

364 posts since 8/14/2018

At some point, I’d like to get ahold of a pot metal top tension flange to replace one that had begun cracking. Prucha is still in the game — but most of their hardware is out of stock at the usual spots here in the states.

I spoke to a sales associate at Greg Boyd’s and they mentioned shipping issues — and it sounded like something that wouldn’t be resolved soon…

Anyone have any insight? Perhaps tariffs making resellers hesitant to take on stock at inflated prices for fear of sitting on it and being unable to recoup… or lack of availability on the manufacturing side?

Edited by - TimFoster on 11/17/2026 20:52:57

Nov 17, 2026 - 9:04:32 PM

chuckv97

Canada

81019 posts since 10/5/2013
Online Now

This is what I can get from a local music store


 

Nov 18, 2026 - 6:08:14 AM
likes this

Helix

USA

17801 posts since 8/30/2006

Gold Tone has GT master planets. I have used them. Not engraved
Their hooks use 6mm, armrests and tailpieces 7mm. I used their gold for a firefighter up in Alaska.

I didn’t want to mention tariffs and postage which are politically manipulated. I lost special handling for $13. Then rates discourage even Canadian exporting.

The bluegrass community could be insular to self-defeating levels, thank goodness for new music and young people. The roots have grown, the branches still hold traditions.

Saga/Golden Gate is a jobber so motivation is to keep doors open. 2-pc. Flanges are gone.

Ken Levan was producing his own hardware and high quality.

People were buying whole RK’s dirty 30’s for parts.
Brass flatbar is always there. Brass pipe, too.
Brass hexbar is heavy but home stock. Brass round stock is utile.

So gold plated brass might be the future.

Nov 20, 2026 - 8:56:32 AM

17866 posts since 6/2/2008
Online Now

quote:
Originally posted by TimFoster

At some point, I’d like to get ahold of a pot metal top tension flange to replace one that had begun cracking.  . . . Anyone have any insight? 


Gold Tone introduced a top-tension model this summer.

I know nothing about the economies of manufacturing, but I'm going to go out on a limb and say that the tooling to make the flange and tension hoop does not make economic sense for the numbers of banjos likely to be sold. Again, I don't know the business, but I recall that when Gold Tone first started making the OB-3 Twanger they were imported in batches of 36, months apart.

So: This suggests to me that to keep the cost per flange (and tension hoop) at a reasonable level, Gold Tone might produce them in quantities to start offering them as standalone parts -- as they already do with their one-piece flange, tone ring and rims.

Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)

Copyright 2026 Banjo Hangout. All Rights Reserved.





Hangout Network Help

View All Topics  |  View Categories

7.421875E-02