Banjo Hangout Logo
Banjo Hangout Logo

Premier Sponsors


Oct 18, 2026 - 3:15:38 AM
like this
4 posts since 10/18/2026

This will seem a little off, but I need a little help.

A number of years ago, I built a dulcimer and learned to play it over time.

Then my daughter played it some and kind of kept it...

But she said she really wanted a mandolin, so I promised to build her one if she gave me the dulcimer back.

So I did, took 3 years, but I did.

Annnnnnd, she gave me the sad face and kept them both.

So I started building me a banjo.

I'm not a luthier by any means, just a guy that builds things and isn't afraid to fail so I just get to it.

Now, I'm sitting here finishing a banjo made mainly of persimmon and catalpa and bits of other wood from the farm and I'm trying to figure out what strings would be best.

It's a 10" pot, with a roughly 23" scale. 4 strings.

This site has been a wealth of information for everything else I've researched, but I can't get a handle on the strings.

Ultimately, I'll use it just to plink out an old forgotten tune or melody, so I'm not looking at performance level.

Just musical.

Thanks in advance.

 

And I'm trying to post a picture so y'all can see it.




Edited by - UnderHammer on 10/18/2026 03:25:50

Oct 18, 2026 - 5:45:12 AM
like this

martyjoe

Ireland

1025 posts since 3/24/2020

23” is standard tenor banjo scale length so you can just get a set of tenor banjo strings. CGDA is the standard tenor banjo tuning but if your daughter gets a sniff of that banjo she’ll be looking for GDAE tuning. Either way there are string sets made up off the shelf for both tunings. Some people around here that have GDAE tuning get a set of coated phosphor bronze Elixir 12s and use the 1st, 2nd, 4th & 5th.

Oct 18, 2026 - 6:12:16 AM
Players Union Member

Mark D

USA

111 posts since 7/8/2006

Nice work on that deep looking pot !
Is it going to be fretless ?
Metal or nylon strings ?

Oct 18, 2026 - 6:40:38 AM

4 posts since 10/18/2026

I'll cut the frets in after I set a bridge location and determine a final scale length.

And thanks for the compliment. It turned out better looking than I thought.

5 coats of tung and a couple weeks of setting really made the persimmon pop.

Oct 18, 2026 - 6:56:58 AM
likes this

418 posts since 7/31/2012

For (low) GDAE/Irish tuning, I've been using

.011 (or .0115) plain steel
.018 phosphor wound
.026 pw
.036 (or .038) pw

Not that I'm an expert on the subject, but this was recommended to me as a good middle-of-the-road starter set, and I haven't felt the need to update it.

Oct 18, 2026 - 9:31:36 AM
likes this

4 posts since 10/18/2026

quote:
Originally posted by martyjoe

23” is standard tenor banjo scale length so you can just get a set of tenor banjo strings. CGDA is the standard tenor banjo tuning but if your daughter gets a sniff of that banjo she’ll be looking for GDAE tuning. Either way there are string sets made up off the shelf for both tunings. Some people around here that have GDAE tuning get a set of coated phosphor bronze Elixir 12s and use the 1st, 2nd, 4th & 5th.


Thanks @martyjoe for the reply.  Very helpful.

As far as my daughter goes, she doesn't even know about this build, and I hope to keep it that way, as long as I can.wink

Oct 18, 2026 - 10:29:14 AM
likes this

Alex Z

USA

6290 posts since 12/7/2006

quote:
Originally posted by banjoboyd

For (low) GDAE/Irish tuning, I've been using

.011 (or .0115) plain steel
.018 phosphor wound
.026 pw
.036 (or .038) pw

Not that I'm an expert on the subject, but this was recommended to me as a good middle-of-the-road starter set, and I haven't felt the need to update it.


This is a good choice.   The overall gauges fit the octaves you'll be tuning to in the low G tuning, considering the scale length, and the relative diameters will result in fairly even tension across the strings. 

Oct 24, 2026 - 10:07:10 AM

4 posts since 10/18/2026

Thanks for the help gentlemen.  I've ordered some tenor banjo strings.

Spent the morning making a flesh hoop and putting on the skin.




Nov 16, 2026 - 6:52:13 PM

verve

USA

11 posts since 11/16/2026

For GDAE at a 23 inch scale, a set around .012, .020 wound, .030 wound and .042 wound comes out fairly even, roughly 19 to 22 lb per string by D'Addario's published figures. If the E feels too tight, drop to .011.

I put together a free printable tension guide that shows each gauge at 20 to 24 inch scales, colored loose, right or stiff, so you can see what you're getting before you buy: lowstrings.discourse.group/t/f...ocello/45

Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)

Copyright 2026 Banjo Hangout. All Rights Reserved.





Hangout Network Help

View All Topics  |  View Categories

0.1914063