Banjo Hangout Logo
Banjo Hangout Logo

Premier Sponsors


Oct 15, 2026 - 1:22:23 PM

bFunk

USA

147 posts since 5/22/2009

I'm amassing quite the collection of banjo heads and bridges, and would like to come up with a system to easily be able to tell their measurements without having to bust out a ruler every time.

Using pencil to write the measurements on the heads and bridges seems safe, but does anyone ever use pen? Can there be any issues with writing pencil or pen on any of the materials (including skin heads)?

Curious about everyone's strategies to keep track of the madness!

Oct 15, 2026 - 2:18:45 PM
like this

16867 posts since 10/30/2008

I find bridge sellers/makers often write height and sometimes weight and sometimes "Crowe Spacing" under the feet of a bridge with pencil.

Oct 15, 2026 - 2:26:38 PM
like this

Bart Veerman

Canada

6203 posts since 1/5/2005

I used to use a  pencil thin Sharpie to write my name at the front of the bridge and the specs (wood, height, string spaci g) on the bottom of the bridges' feet.

Retired  now so no more.

Edited by - Bart Veerman on 10/15/2026 14:28:53

Oct 15, 2026 - 2:56:11 PM
like this

3948 posts since 4/7/2010

I use a pencil on skin heads and bridges. Not a problem to erase when you don't want it.

On a plastic head I use a sharpie in the outside edge of the aluminum flesh hoop.

Bob Smakula
smakulafrettedinstruments.com

Oct 15, 2026 - 3:21:37 PM

17869 posts since 6/2/2008

All private maker bridges I've bought have height and weight written on the underside of two feet, with what's written on the third foot varying by maker. String spacing (Standard or Crowe) or wood type are two things that come to mind.

Always pencil.

If  I were going to write on a head, I'd write in pencil on a  vertical side where it would be hidden by the tension hoop, on a part of the flesh hoop that would be hidden by the neck or tailpiece, or (in the absence of a logo) on the surface of the head itself where it could also be hidden under the tailpiece.

Oct 15, 2026 - 9:16:05 PM

banjonz

New Zealand

13027 posts since 6/29/2003

Writing on the outside of the mounting band in pencil preferable. All my bridges I weigh on a digital micro scale and measure the height with my digital vernier. Both figures I write in pencil on the underside of the feet.

Oct 16, 2026 - 8:59:29 AM

kat eyz

USA

1222 posts since 10/1/2003

i use ink because using a pencil will fade away quicker than you might expect especially if your written info becomes 20 years old . On a bridge, written info on the foot bottom gets a lot of wear and tear ....using the under side of the oval cutouts will preserve the written info a very long time . On a head, ink info on a small piece of masking tape along the inner or outer
edge might work out pretty well .

Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)

Copyright 2026 Banjo Hangout. All Rights Reserved.





0.4726563