Banjo Hangout Logo
Banjo Hangout Logo

Premier Sponsors


Ramsey Banjo Owners

Join This Group

A group for those who own one of Mike Ramsey's wonderful banjos!

167 Members, Created 10/28/2011 -

Administrators: Castania (owner)


< Back to Home

Any specific string recs?

From Dan9000 on 6/5/2023 8:11:17 AM

Did Mike favor any particular set of strings for a 12" Special? If not, anyone got a suggestion that will maintain the deep warm tone? (Not currently thinking Nylgut since I would have to change out the bridge.) Thanks for any information

5 Comments

Ragtimejoe says:
6/5/2023 10:23:13 AM

I've use GHS mediums and am now using GHS PF150 with higher action. Both work fine. Just a different sound and how fast you want to be able to move around. Get a couple of sets of both sizes from different manufacturers and try them out.

moserjim says:
6/5/2023 12:21:11 PM

Having bought two Ramsey banjos from Mr. Ramsey, the strings on both of them were GHS PF160 strings which are mediums. Obviously, this doesn't necessarily mean anything other than they are a good set of strings and don't cost much.

Dan9000 says:
6/6/2023 10:27:34 AM

Thanks for the thoughts.

ZEPP says:
1/7/2024 8:37:06 AM

Banjo strings is banjo strings.

Virtually all the wire is made by Mapes—in fact, the image in this screen shot was on the Mapes website for quite a while:
zeppmusic.com/Temp/mapes_brands.jpg

What the string makers do to turn wire into strings is to coat the wire if appropriate, wind the wound strings, twist the ball or loop end of the wire, cut it to length, package it, and then market it. There really is no acoustic reason to prefer one brand over another.

OTOH, packing is important when considering gauge mixes, i.e. one brand may call "light" gauge one combination of string diameters while another seller might have an entirely different combination of diameters marked as "light."

Too, there are some brand differences in the individual gauges used for the core and the windings of wound strings. In this manner, one brand of .022 inch 4th string could have a .010 core and a .006 winding, while another brand of .022 4th string could have a .008 core an .007 winding. Tension being determined by the core—not the windings—the former would feel stiffer and produce marginally more volume.

So what's the ideal gauge combination? It's entirely up to the player to decide what feels and sounds right.

One trivial consideration is chenille (the fuzzies) seen on some loop ends: Mike used no-knot tailpieces, and the section of string between the bridge and such a minimalist tailpiece can sometimes sing along harmonically—but not with pitches one wishes to hear. With a 12-inch pot, this effect is magnified by the longer string length between bridge & tailpiece.

Chenille effectively mutes that section of the string.* Plus, IMHO, it looks cool.** Unfortunately, the string makers have stopped selling chenilled strings, as they are significantly more expensive to make.*** For years, Ome sold chenilled strings (made by D'Addario who declined to take on any subsequent chenilled brands); I have absolutely no idea if Gold Tone will now be inclined to do so.

So, after all this prolix rambling, my advice is to try a bunch of different string gauges, and then pick the cheapest set that you like!

Cheers,
ZEPP


* Such overtones can also be easily muted by simply weaving a piece of paper, rawhide, shoelace, cardboard, etc. in and out between the strings back at the tailpiece.

** As the preceding footnote more or less obviates a need for chenilled strings, I would point out that the "cool factor" is, for me, by far the more important consideration.

*** Cooler yet: If you tie your own flies for fishing, you're all set to chenillle your own strings.

BDCA says:
1/7/2024 9:15:25 AM

Great information Zepp! I hope you are doing well! I own 12 Irish tenors and 3 5 strings including 3 Ramseys.. In terms of sound, I still believe he made the best sounding banjos with the possible exception of Romero. Not always the best fit and finish, and the WORST wine!
Bob


Post a Comment

You must be logged in and a member of this group to post a comment.

Linked Content

Forum Post: (untitled)
Linked by bcorwin 2 years ago

Tablature: Crossing The Little Doe River
Linked by eandreucci 2 years ago

Click for Details

Ramsey190
Linked by Bum Ditty Brendan 6 years ago: Ramsey #190 made in Lebanon Ohio. It has a one of a kind aluminum Stelling tone ring. Geoff Stelling confirmed he made the tone ring and does not recall how it left his workshop.

Click for Details

Ramsey Woody 12” (walnut)
Linked by davidwigal 8 years ago

Click for Details

Ramsey Electric Whyte Lady Style Banjo Brand New
Linked by dobrodoc 9 years ago

Click for Details

NEW RAMSEY CUSTOM SPECIAL ELECTRIC / WHITE LADYE (SOLD)
Linked by fiberflex 10 years ago: New Ramsey Custom Electric just listed...

Classified: BACON FF TONE RING.
Linked by John Bowlin 10 years ago

Forum Post: (untitled)
Linked by John Bowlin 10 years ago

Click for Details

VEGA 5-String NEW LOW PRICE UNTIL XMAS $550.00 Folklore model 1964-5 w/Case
Linked by John Bowlin 11 years ago

Click for Details

Gaudy Amos Igatur: a 1998 Ramsey "Fancy" Fretless Maple Special
Linked by ZEPP 11 years ago

Page: 1  2  3  4  Last

Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)

Copyright 2026 Banjo Hangout. All Rights Reserved.





Hangout Network Help

View All Topics  |  View Categories

7.421875E-02