Banjo Hangout Logo
Banjo Hangout Logo

Premier Sponsors


 All Forums
 Other Banjo-Related Topics
 Collector's Corner
 ARCHIVED TOPIC: Any thoughts about this banjo?


Please note this is an archived topic, so it is locked and unable to be replied to. You may, however, start a new topic and refer to this topic with a link: http://www.banjohangout.org/archive/377813

rmcdow - Posted - 09/17/2021:  16:35:25


I believe this banjo is likely a Buckbee, but would like input and opinions on that. It has the numbers 1 - 12 on the fretboard, in between the frets. The scale length is 24.75", the nut is 1 3/8", the neck at the pot is 2.150". It needs a 1/2" or 7/16" bridge for the action to be correct; I didn't have one and will make one for it. The tailpiece is not original; it is one I made from ebony. Two of the pegs are original, the rest are violin pegs I bought. The head was on it when I acquired it, and cleaned up nicely.


Edited by - rmcdow on 09/17/2021 16:43:58


TriMD180 - Posted - 09/17/2021:  21:34:50


quote:

Originally posted by rmcdow

I believe this banjo is likely a Buckbee, but would like input and opinions on that. It has the numbers 1 - 12 on the fretboard, in between the frets. The scale length is 24.75", the nut is 1 3/8", the neck at the pot is 2.150". It needs a 1/2" or 7/16" bridge for the action to be correct; I didn't have one and will make one for it. The tailpiece is not original; it is one I made from ebony. Two of the pegs are original, the rest are violin pegs I bought. The head was on it when I acquired it, and cleaned up nicely.






Looks very much like a Buckbee. The end piece that the tail piece fastens to looks very much like the one on my Morrison which was made by the Buckbee factory.

mrphysics55 - Posted - 09/18/2021:  05:19:13


Buckbee!
The "brace" between the heel and dowel stick ilooks to be an Ad-on (?).

rmcdow - Posted - 09/18/2021:  06:07:22


quote:

Originally posted by mrphysics55

Buckbee!

The "brace" between the heel and dowel stick ilooks to be an Ad-on (?).






The brace is hand forged, and appears to be old also.  It is hard to tell whether it was original to the banjo, but based on the small crack in the dowel where the brace connects with two screws there, it seems like it was probably added after market.

Terms of Use | Privacy Policy | Privacy Consent (EU/GDPR Only)

Copyright 2026 Banjo Hangout. All Rights Reserved.





Hangout Network Help

View All Topics  |  View Categories

0.046875