Banjo Hangout Logo
Banjo Hangout Logo

Premiere Sponsors

707
Banjo Lovers Online


mike gregory's Photos


Hansen2

View All Photos

Click to Enlarge
Click to Enlarge
5th Peg
Click to Enlarge
Finished banjo
Click to Enlarge
Peg Closeup
Click to Enlarge
Peghead detail
Click to Enlarge
Almost Done
Click to Enlarge
Bike spokes for bracket hooks.
Click to Enlarge
Aircraft rod
Click to Enlarge
Circle
Click to Enlarge
Salad Bowl
Click to Enlarge
Dead As A DODrO pic 1
Click to Enlarge
Dead As A DODrO pic 2
Click to Enlarge
Dead As A DODrO pic 3
Click to Enlarge
Dead As A DODrO pic 4 PEGHEAD
Click to Enlarge
Dead As A DODrO pic 5 Finished
Click to Enlarge
Dead as a DODrO Pic 6 Brass handle as "UnderNut"
Click to Enlarge
Dead as a DODrO pic 7 the tailpiece.
Click to Enlarge
Dead as a DODrO pic 8 Another view of the finished project
Click to Enlarge
DODrO Slide
Click to Enlarge
Coffin-shaped resophonic guitar
Click to Enlarge
Coffin Tailpiece pic 1
Click to Enlarge
Coffin Tailpiece pic 2
Click to Enlarge
Coffin Tailpiece pic 3
Click to Enlarge
Coffin tailpiece see-through drawing
Click to Enlarge
Internal tension salad bowl 2015
Click to Enlarge
Drill stop block for salad bowl banjo
Click to Enlarge
Drilling for the internally tensioned salad bowl banjo
Click to Enlarge
56 tacks inside the salad bowl
Click to Enlarge
Inner tension salad bowl banjo pot, epoxy drying
Click to Enlarge
Towel ring as internal tensioner 1
Click to Enlarge
Towel ring as internal tensioner 2
Click to Enlarge
Salad Bowl internal tension banjo TENSIONERS- under construction
Click to Enlarge
Salad Bowl internal tension banjo TENSIONERS-Installed
Click to Enlarge
Salad Bowl Banjo NECK
Click to Enlarge
Salad bowl banjo NECK, geared 5th view 1
Click to Enlarge
Salad bowl banjo NECK, geared 5th, view 2
Click to Enlarge
Internal Tension salad bowl- preliminary view.
Click to Enlarge
Internal Tension salad bowl-Neck 1/3 done
Click to Enlarge
Internal Tension salad bowl- Heel & Dowel
Click to Enlarge
Internal tension salad bowl Banjo- Fork tailpiece
Click to Enlarge
Internal tension salad bowl Banjo-Peghead
Click to Enlarge
Internal tension salad bowl Banjo- preliminary overall
Click to Enlarge
Internal tension salad bowl Banjo- Fork tensioner
Click to Enlarge
Internal tension salad bowl Banjo- Centerline check
Click to Enlarge
Internal tension salad bowl Banjo-external shot of fork
Click to Enlarge
Salad Bowl banjo- higher bridge, tighter head, no fork.
Click to Enlarge
LeVan style LID
Click to Enlarge
Ten-Inch PVC banjo, steps 1 thru 3, exterior view
Click to Enlarge
Ten-Inch PVC banjo, steps 1 thru 3, interior view
Click to Enlarge
Embroidery hoop as tension hoop
Click to Enlarge
10 inch PVC banjo- Bike Spokes for J hooks
Click to Enlarge
10 inch PVC banjo- How the body looks
Click to Enlarge
10 inch PVC banjo- Close up of bike spoke as J-hook with #8 washer and scew eye
Click to Enlarge
10 inch PVC banjo- Tuning the head.
Click to Enlarge
10 inch banjo, PVC body. Raw neck
Click to Enlarge
10 inch PVC banjo- Nearly finished #1
Click to Enlarge
10 inch PVC banjo- Nearly finished # 2- Side view
Click to Enlarge
10 inch PVC banjo- Nearly finished # 3 neck joint
Click to Enlarge
10 inch PVC banjo- Marking frets
Click to Enlarge
10 inch PVC banjo- Fork Tailpiece, top view
Click to Enlarge
10 inch PVC banjo- Tailpiece, bottom view
Click to Enlarge
10 inch PVC banjo- Tailpiece & bridge
Click to Enlarge
10 inch PVC banjo- Headstock and guide pins
Click to Enlarge
Ten inch rim from 2x4 common stock lumber (Picture #1)
Click to Enlarge
Ten inch rim from 2x4 common stock lumber (Picture #1)
Click to Enlarge
Quick cheap easy rims are NOT Pic #1
Click to Enlarge
Quick cheap easy rims are NOT Pic #2
Click to Enlarge
Graftone Green Banjo construction, #1
Click to Enlarge
Graftone Green Banjo construction, #2
Click to Enlarge
Graftone Green Banjo construction, #3
Click to Enlarge
Graftone Green Banjo construction, #4
Click to Enlarge
DIY Pegs Pic 3
Click to Enlarge
DIY Pegs Pic 2
Click to Enlarge
DIY banjo tuners Pic 1
  

Hangout Network Help

View All Topics  |  View Categories