View John Herrington's Homepage
Read John Herrington's Bio
Contact John Herrington
You must sign into your myHangout account in order to contact John Herrington.
Playing Since: 2007
Experience Level: Purty Good
John Herrington has made 1 recent addition to Banjo Hangout
WL250 Goldtone (love this frailing banjo!),
Home made mountain banjo, Prust ministrel banjo, and large gourd banjo that I made.
Most recently, an old restored Buckby and an Enoch Tradesman
Jim Conner(played frailing banjo with the New Kingston Trio and John Denver)
Classified Rating: 0
Rate this Member
Visible to: Public
Last Visit 3/28/2013
Saturday, March 26, 2011 @2:34:11 PM
Well things are getting back to normal in the Herrington household, after over a year and a half of health problems, and I ought to do a new blog entry.
My interests have focused lately on building a couple of gourd banjos. I have the materials on hand and am about halfway on the first one. It will end up with an 8 inch calf skin head. The gourd is about 10 inches maximum width and measures 5 inches in height after the top is cut out of it. It is one of several I purchased from the Welburn Gourd Farm in CA. (Incidentally, I highly recommend any potential banjo builders to contact them, look over their very interesting internet catalog and buy your gourds soon. You may just Google Welburn Gourd Farm and go from there.)
I use the canteen gourd they produce, though they have many more shapes and sizes. My personal banjo(see my pictures) is a 12 inch gourd and produces a very deep mellow sound which I like. The others in the pictures are around the size of the one I am building. I have learned that this size produces a sharper sound while still maintaining much of the larger gourd's depth.
I use various woods for the neck, preferring curly maple. I build them with various shapes of peg head and heel. The one I am building at the present is made of cherry and has a Dobson style heel. Its peg head is one of a modified Sweeney style.
I only build fret free banjos, some with fingerboards of iron wood, which is very beautiful and hard. My own has no fret board and works fine. A gourd banjo ought always to be strung with genuine gut strings. I use Purr'll Gut brand provided for me by Bob Thornburg, owner of Sierra View Acoustic Music, in Bishop, CA. You can find him under this listing on Google.
Let's see, now, I use fiddle ebony tuners for my banjos. One can make his own, however of Rosewood or Iron wood, or whatever suits your taste.
When I install the head, I soak the skin about 30 minutes in water, drape it over the gourd's open top and use a Dremel tool to drill a hole through the wet skin and gourd at 12 o'clock just a little smaller than the uphostlery tacks I will use. Then I push the tack through the skin and gourd. I proceed to do the same at 6 o'clock followed by tacks at 3 o'clock and 9 o'clock. Be careful not to stretch the skin between the tacks! Only remove the wrinkles...no more.
I then half the distance between each tack and follow the same procedure, drilling and installing the tack nearest you and then the one fartherest from you until they are no more than one inch apart on a line around the top of the banjo about 3/4 of an inch below the top edge of the banjo. I repeat, do not stretch the skin as you install it. It is wet rawhide and when it dries it might crack your gourd! It will be extremely tight within 12 hours. Another thing to remember is, resist the urge to test the tightness by pressing down on the head, that depression may be permanent if you do it until it has set over night.
My, but this has been a long blog. My apologies but let me conclude with a couple of three remarks. Fit the neck to the banjo before you install the head. It is formed either with an extension that shall go through the banjo and stick out about 3 inches. It ought to be installed with a drop of between 2 and 3 degrees from the horizontal line of the top of the head to the nut . If the wood of your banjo neck is not long enough to do this, you will have to carefully drill a hole in the heel and install a dowel stick with glue in this hole and then proceed as above.
Remember there are many ways to skin a cat...and to build a gourd banjo. Hope this helps some of your who have asked for help. Write me about that which your don't understand. Paul Roberts on the Hang out did an interview on Banjo Crazy .com. If you are interested Google that in and move down to Interviews and scroll down to my name.
Old John on the Big Horn
Recent Forum Posts
What is the best clawhammer banjo (55 days ago)
Find all non-archived posts by John Herrington
Gourd Banjo Owners and Builders
John Herrington has 46 friends. View entire friends list.
Music (8 files)
View All Photos